Simple Interface designed for easy control

No space limitation during operation

Optimized Design for user interface

Ergonomic and compact body

Suitable for use with most major brands of Ni-Ti files

ENDO MODE

RPM: 100-600 RPM

TORQUE: 1`4N.com

GEAR RATIO: 16:1, 20:1

ROTATION MODE: 1, 2

PROGRAM FUNCTION

5 memory programs for (Gear Ratio, Torque, RPM, Direction mode) can be set

SETTING TORQUE LIMIT FUNCTION

Once actual load on the file is higher than the preset torque, it will automatically stop working.

ROTATION MODE

Users can choose auto-rotation mode according to operation condition.

Mode 1: Once actual torque is over the preset torque, the file moves in reverse rotation. After removing the load, it stops.

Mode 2: Once actual torque is over the preset torque, the file runs reverse automatically and it turns forward rotation again once load released.

AUTO-OFF FUNCTION

Powers off with "Beep" sound after 4 minutes when not operating.

CHARGER (TRAUS XEW10)

RATED VOLTAGE: AC100-240V, 50/60Hz

OUTPUT: DC4V

CHARGING TIME: approx 2.5 hours

USING TIME: approx 8.5 hours

MOTOR HANDPIECE (TRAUS MCE10XX)

ROTATION SPEED (min): 200-900, GEAR RATIO: 10:1, TORQUE LEVEL (Ncm): 1.0-2.0

ROTATION SPEED (min): 100-600, GEAR RATIO: 16:1, TORQUE LEVEL (Ncm): 1.0-4.0

ROTATION SPEED (min): 100-600, GEAR RATIO: 20:1, TORQUE LEVEL (Ncm): 1.0-4.0

Endo